How to Reset Divoom Ditoo:A Step-by-Step Guide to Restore Factory Settings"
Soft Reset (Restart)
-
Power Off Ditoo: Ensure that your Divoom Ditoo is turned on.
-
Press and Hold Power Button: Locate the power button on your Ditoo (usually on the side or top). Press and hold it until you see the device powering off completely. This is a soft reset that restarts the device.
-
Wait for Reboot: After the screen goes blank, release the power button. Your Ditoo will then reboot, and you should see the Divoom logo.
Factory Reset
If you need to perform a more comprehensive reset that restores your Divoom Ditoo to its factory settings, follow these steps:
-
Power Off Ditoo: Ensure that your Divoom Ditoo is turned on.
-
Access the Settings Menu: Navigate to the "Settings" menu on your Ditoo. You can usually find this by tapping on the screen and then looking for a settings icon or by swiping down from the top of the screen to access the settings.
-
Select "System" or "Reset": Within the settings menu, look for an option like "System" or "Reset." The specific wording may vary depending on the firmware version.
-
Choose "Factory Reset": In the "System" or "Reset" section, you should find an option to perform a factory reset. Select this option.
-
Confirm the Reset: Your Divoom Ditoo will likely ask you to confirm the factory reset since this action erases all user data. Confirm the reset.
-
Wait for Reset to Complete: The device will reset to its factory settings, and you should see the initial setup screen when it's done.
-
Set Up Your Ditoo: Follow the on-screen prompts to set up your Divoom Ditoo as if it were a new device. You may need to connect it to your Wi-Fi network, select your region, and log in with your Divoom account if applicable.
Please note that a factory reset erases all your personal data and settings, so use this option with caution. It's typically used when you want to start fresh with your Divoom Ditoo or if you're experiencing significant issues that a soft reset doesn't resolve.
